Lighting the applianceThe system works by means of a battery. Details on how to replace thebattery are given in 'General Information'.HotplateTo light:1 Lift up the lid. You cannot use the hotplate when the lid is down.2 Push in the control knob and turn to the large flame symbol (highestsetting), and press the ignition button immediately. When the burnerhas lit release the button.Warning: If the ignition button is not pressed immediately a build up of gasmay cause the flame to spread.Please note: If you have any trouble lighting a hotplate burner turn all thehotplate control knobs off. Make sure that the burner parts have beenreplaced correctly.Grill/second ovenThe grill and the second oven are operated by the same control so youcannot use them both at the same time.Z C G 5 0 0 0 / 5 0 0 14Lighting the applianceFor your safetyIf you close the lid of the appliance while any of the hotplateburners are lit the gas will go out. This is because it would bedangerous if the burners stayed on when the lid was closed.Always use the control knob to turn off a burner. Do not usethe lid as a cut-off device. This will only cut off the gas whenthe lid is closed. The gas will flow again when the lid isopened.For your safetyIn the event of the burner flames being accidentally extinguished, turnoff the burner control and do not attempt to re-ignite the burner for atleast 1 min.FRONT LEFT