Zanussi ZCG667 User Manual

Also see for ZCG667: User manual

Contents

What to do if…Warning! Refer to "Safety information"chapter.Problem Possible cause RemedyThe appliance does not operate. The fuse in the fuse box is re-leased.Control the fuse. If the fuse is re-leased more than one time, referto a qualified electrician.The appliance does not operate. The appliance is too hot. Cool down the appliance for somehours.The grill, burners, ovens do notwork.There is no electrical supply. Make sure that the unit is connec-ted and the electrical supply isswitched on.The grill, burners, ovens do notwork.There is no electrical supply. Examine the house electrical in-stallation fuse.The grill, burners, ovens do notwork.There is no gas supply. Examine the house gas supply,use other gas appliance (Centralheating or gas fires).There is no spark when lightingthe gas.Burner cap and crown are placeduneven.Make sure that the burner cap andcrown are in correct positions.The flame is blow out immediatelyafter ignition.Thermocouple is not heated suffi-cient.After lightning the flame, keep theknob pushed for approximately 5seconds.The gas ring burns unevenly. The burner crown is blocked withfood residue.Make sure that the injector is notblocked and the burner crown isclear of food particles or cleaningfluids. Dry them with a cloth andclean stubborn marks away with adry nylon brush (for example anold toothbrush).The oven does not heat up. The oven is not switched on. Switch on the oven.The oven does not heat up. The necessary settings are notset.Control the settings.The oven does not cook evenly. Check that the appliance is cor-rectly installed and levelled, andthat you use the recommendedtemperatures and shelf positions.The oven lamp does not operate. The oven lamp is defective. Replace the oven lamp.Steam and condensation settle onthe food and in the oven cavity.You left the dish in the oven fortoo long.Do not leave the dishes in theoven for longer than 15-20 mi-nutes after the cooking processends.18 www.zanussi.com