Zanussi ZDS 679 EX Instruction Booklet

It is essential that the recess dimensions indicatedin the diagram are followed.No further openings for venting of the dishwasherare required, but only to let the water fill and drainhose and power supply cable pass through.The recess height may be anywhere between 820and 880 mm from the floor since the dishwasherincorporates adjustable feet (max 60 mm).A distance of 2 mm should be allowed between thetop of the dishwasher and the counter top.When inserting the machine, ensure that the waterinlet and drain hoses are not kinked or squashed.LevellingGood levelling is essential for correct closure andsealing of the door. When the appliance is correctlylevelled, the door will not catch on the levellingspacers, either side of the cabinet.If the door does not close correctly, loosen ortighten the adjustable feet until the machine isperfectly level.The furniture doorThe door of this appliance is designed for theoverlay of a panel having the following dimensions:Width 596 mm maxHeight * 50 - 120 mm maxThickness 20 mm max* The height of the panel depends on the height ofthe kitchen plinth.AttentionThe panel height should be no more thanindicated, otherwise complete opening of the doorwill no longer be possible as the panel hits againstthe dishwasher plinth.Mounting the furniture door1. Drill the panel with a Ø 2 x 12 bit according tothe dimensions indicated in the figure.2. Fix the panel to the cross bar provided with 2screws 3,5 x 16.3. Fix the cross bar to the dishwasher door with 2screws 3,5 x 16 after having inserted the twohooks of the cross bar on the lower section ofthe door.Building-in50 PFI19GBII70818 ÷ 878596 600820 ÷ 880II72120: 50100:170220820114461 714II71 45845823II69

/ 28

Related manuals for Zanussi ZDS 679 EX