Zanussi ZDS 679 EX Instruction Booklet

6. Economy dryingBy pressing this button you can opt to shorten orcompletely eliminate the hot air drying cycle, somaking a considerable energy saving.Eco dryingNo dryingIf programme nr. 7 is selected the indicator light"No drying" will come on for default but it isposssible to change the setting by depressing thisbutton.With the programme nr. 1 the drying options arenot available.If both pilot lights are out, the full drying cyclewill be carried out.7. Digital display8. Delay start buttonAllows the start of the programme to be delayedby a minimum of 1 hour, up to 9 hours.How to set the “Delay start”:When the button is pressed, the number 1followed by the letter H appears in the display.This means that you have delayed the start of theprogramme by 1 hour.Press the button again to select the number ofhours by which you wish to delay the programmestart, up to a maximum of 9.The delay start will not modify the settings madepreviously.Close the dishwasher door and press the startbutton (if the start button is pressed with the dooropen the door indicator light will flash). All thephase indicator lights are off.The countdown will begin and the display willindicate with step of 1 hour how much longerthere is to go before the beginning of theprogramme. The letter H on the display will flashindicating the delay is operating.If you wish to cancel the delay start, press thestart button until you see two zeros in the digitaldisplay.9. Start pushbuttonThis is the last button to be pressed after settingthe wash programme and, if required, dryingoptions, half load, delayed start.This button starts the programme. On the digitaldisplay you can read the approximate duration inminutes of the programme and, as it proceeds,how much longer there is to go before the end ofthe programme with step of 5 minutes.At 10 minutes from the end of the programme thestep will be 1 minute.You will be continuosly informed what phase inthe washing programme the dishwasher hasreached by illuminating the phase under way.At the end of the programme in the digital displaywill appear due zeros.To cancel or change a programmeYou are able to cancel or change a programmewith the door open or closed.If you wish to cancel/change a programme whichis already running or a setting which has justbeen made, press the start button until two zerosappear in the digital display and the indicatorlights (except the On/OFF indicator light) turn off.Now a new programme and new options may beselected.10. Programme phase indicatorlightsAs soon as you select a washing programme, thisilluminates all the phases the programmeconsists of.As the programme progresses, the phase underway will illuminate.At the end of the programme the phase indicatorlights turn off.Prewash/Rinse and HoldWashRinseHot air drying32 PCP15GB