Zanussi ZDT16002 User Manual

Contents

Problem Possible cause Possible solutionThe quantity of detergent was too much. Make sure that you add the correct quan-tity of detergent in the dispenser beforeyou start a programme.Dry water drop stains onglasses and dishes.The released quantity of rinse aid wasnot sufficient .Increase the released quantity of rinse aid.The quality of the detergent can be thecause.Try a different brand of detergent.The dishes are wet. • The programme had no drying phase.• The programme had a low tempera-ture drying phase.For better drying results, keep the doorajar for some minutes.The dishes are wet and matt. The rinse aid dispenser is empty. Make sure that there is rinse aid in therinse aid dispenser.The quality of the rinse aid can be thecause.Try a different brand of rinse aid.The quality of the combi detergent tab-lets can be the cause.• Try a different brand of combi deter-gent tablets.• Activate the rinse aid dispenser anduse the rinse aid together with thecombi detergent tablets.Activating the rinse aid dispenser with the multitabfunction activated1. Press the on/off button to activate the appliance.2. Make sure that the appliance is in setting mode. Referto ‘SETTING AND STARTING A PROGRAMME'.3. Press and hold function buttons (BB) and (CC) at thesame time until the indicators of function buttons (AA),(BB) and (CC) flash.4. Press function button (BB).• The indicators of function buttons (AA) and (CC) gooff.• The indicator of function button (BB) continues toflash.• The display shows the setting of the rinse aid dis-penser.OffOn5. Press function button (BB) to change the setting.6. Deactivate the appliance to confirm.7. Adjust the released quantity of rinse aid.8. Fill the rinse aid dispenser.Technical informationDimensions Width / Height / Depth (mm) 596 / 818-898 / 555Electrical connection Refer to the rating plate.Voltage 220-240 VFrequency 50 Hz26