Zanussi ZDTS401 User Manual

Contents

Zanussi ZDTS401 User Manual Manual pdf 12 page image

3Fill the detergent dis-penser (A) with deter-gent.4If you use a washing pro-gramme with prewashphase, put more deter-gent in the prewash de-tergent compartment (B).5 6Different brands of detergent dissolve in differenttimes. Some detergent tablets do not have thebest cleaning results during short washing pro-grammes. Use long washing programmes when youuse detergent tablets to fully remove the detergent.Multitab functionThe multitab function is for combi detergent tablets.These tablets contain agents such as detergent, rinseaid and dishwasher salt. Some types of tablets cancontain other agents.Do a check if these tablets are applicable for the localwater hardness. Refer to the instructions from the man-ufacturer.When you set the multitab function, it stays on until youdeactivate it.The multitab function stops automatically the flow ofrinse aid and salt. The rinse aid indicator light and saltindicator light are deactivated.The programme duration can increase if you use themultitab function.Activate or deactivate the multitab function beforethe start of a washing programme.You cannot activate or deactivate the multitab functionwhen the programme operates. Cancel the washingprogramme, then set the programme again.To activate the multitab function:• Press the multitab button. The multitab indicator lightcomes on.To deactivate the multitab function:• Press the multitab button. The multitab indicator lightgoes off.Do these steps if the drying results are notsatisfactory:1. Fill the rinse aid dispenser with rinse aid.2. Activate the rinse aid dispenser.3. Set the rinse aid dosage to position 2.• You can only activate or deactivate the rinse aiddispenser when the multitab function is activated.To activate/deactivate the rinse aid dispenser:1. Switch on the appliance.2. Make sure that the appliance is in setting mode.3. Press and hold function buttons B and C.– The indicator lights for function buttons A, B, andC start to flash.4. Press function button B.– The indicator lights for function buttons A and Cgo off.– The indicator light for function button B contin-ues to flash.– The digital display shows the setting.Rinse aid dispenser de-activatedRinse aid dispenser acti-vated5. Press function button B again.– The digital display shows the new setting.6. Switch off the appliance to save the operation.12