Zanussi ZDTS401 User Manual
                    | |
Contents
| 
Warning! To discard the appliance, follow theprocedure:• Pull the mains plug out of the socket.• Cut off the mains cable and mains plug and discardthem.• Discard the door catch. This prevents the childrento close themselves inside the appliance and en-danger their lives.InstallationWarning! Make sure that mains plug isdisconnected from the mains socket duringinstallation.Important! Obey the instructions in the enclosedtemplate to:• Build-in the appliance.• Install the furniture panel.• cConnect to the water supply and drain.Install the appliance under a counter (kitchen worktopor sink).If a repair is necessary, the appliance must be easilyaccessible for the engineer.Put the appliance adjacent to a water tap and a drain.For the venting of the dishwasher only water fill, waterdrain and power supply cable openings are necessary.The dishwasher has adjustable feet to allow the ad-justment of the height.Make sure that the water inlet hose, the drain hose andthe supply cable are not kinked or squashed, when youinsert the machine.Attaching the appliance to the adjacent unitsMake sure that the counter below which you attach theappliance is a safe structure (adjacent kitchen units,cabinets, wall).Adjusting the level of the applianceMake sure that the appliance is level to close and sealthe door correctly. If the level of the appliance is correct,the door does not catch on the sides of the cabinet. Ifthe door does not close correctly, loosen or tighten theadjustable feet until the appliance is level.Water connectionWater inlet hoseConnected the appliance to a hot (max. 60°) or coldwater supply.If the hot water comes from alternative sources of en-ergy that are more environmentally friendly (e.g. solaror photovoltaic panels and aeolian), use a hot watersupply to decrease energy consumption.Connect the inlet hose to a water tap with an externalthread of 3/4”.Caution! Do not use connection hoses from anold appliance.The water pressure must be in the limits (refer to 'Tech-nical data'). Make sure that the local water authoritygives you the average mains pressure in your area.Make sure that there are no kinks in the water inlet hoseand that the water inlet hose is not squashed or entan-gled.Turn the inlet hose to the left or the right to suit theinstallation with the locknut. Fit the locknut correctly toprevent water leaks.Caution! Do not connect the appliance to newpipes or pipes that are not used for a long time.Let the water run for some minutes, then connect theinlet hose.Water inlet hose with safety valveThe water inlet hose is a double-walled and has aninner mains cable and a safety valve. The water inlethose is under pressure only while the water is running.If there is a leak in the water inlet hose, the safety valveinterrupts the running water.Warning! Danger-ous voltage17 |
Related manuals for Zanussi ZDTS401
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine