Be careful when you connect the water inlet hose:• Do not put the water inlet hose or the safety valve inwater.• If the water inlet hose or the safety valve is damaged,immediately disconnect the mains plug from themains socket.• Only let the Service Force Centre replace the waterinlet hose with safety valve.Drain hose1Connect the water drainhose to the sink spigot.max 85 cmmin 40 cmmax 400 cm23 4The internal diameter must not be smaller than the di-ameter of the hose.If you connect the water drain hose to a trap spigotunder the sink, remove the plastic membrane (A). If youdo not remove the membrane, remaining food cancause a blockage in the drain hose spigot.Caution! Make sure that the water couplings aretight to prevent water leakage.Electrical connectionWarning! The manufacturer is not responsible ifyou do not follow these safety precautions.Ground the appliance according to safety precautions.Make sure that the rated voltage and type of power onthe rating plate agree with the voltage and the powerof the local power supply.Always use a correctly installed shockproof socket.Do not use multi-way plugs, connectors and extensioncables. There is a risk of fire.Do not replace the mains cable yourself. Contact theService Force Centre.Make sure that the mains plug is accessible afterinstallation.Do not pull the mains cable to disconnect the appliance.Always pull the mains plug.18