Zanussi ZGL 646 Instruction Booklet

Also see for ZGL 646: Instruction booklet

Contents

Zanussi ZGL 646 Instruction Booklet Manual pdf 9 page image

9These hobs can be inserted in a built-in kitchen unitwhose depth is between 550 and 600 mm. The hobsdimensions are shown in the relevant diagram.The edge of the cut out must have a minimum distancefrom the rear wall of 55 mm.If there are side walls, or sides of the furniture unit nearthe hob, the cut out edges must have a minimumdistance of 100 mm.Hanging forniture units or hoods must be placed at 650mm. minimum from the hob.A = Auxiliary burnerSR = Semirapid burnerR = Rapid BurnerPE = Electric hotplateFitting the hob to the worktopThe hobs can be installed in a kitchen unit with anopening for insertion whose dimensions are shown inFig. 9. To install the hob, proceed as follows:1) Place the sealing gasket (supplied with the hob) onthe edges of the cut out: place it exactly on the frontand rear edge, taking care that the sealings meetwithout overlapping;2) Fix the hob with the relevant screws (Fig. 10). Thetraction of the screws is able to trace the sealing, anyexcess of which can be easily removed.The edge of the hob forms a double labyrinth seal whichprovides a total guarantee against infiltration of liquids.Fig. 9Fig. 10a) Sealing gasketDimensions are given in millimetersBuilding InFO 2098FO 0199a500580SRSRRA500580PESRRAMod. ZGL 646 Mod. ZXL 636

/ 11

Related manuals for Zanussi ZGL 646