Zanussi ZI 2404 Instruction Booklet

Also see for ZBA 6160: Specification Specifications Instruction booklet

Contents

40This appliance complies with the following E.E.C.Directives:- 87/308 EEC of 2/6/87 relative to radiointerference suppression.- 73/23 EEC of 19.2.73 (Low VoltageDirective)and subsequent modifications.- 89/336 EEC of 3.5.89 (ElectromagneticCompatibility Directive) and subsequentmodifications.Attention!It must be possible to disconnect the appliancefrom the mains power supply; the plug musttherefore be easily accessible after installation.Building-inDimensions of the recessZI 1604 ZI 2404Height of housing (1) 880 1225 mmDepth of housing (2) 550 550 mmWidth of housing (3) 560 560 mmIt is necessary that the niche is provided with aconduct of ventilation having the followingdimensions:Depth 50 mmWidth 540 mmPR05405032 1Electrical connectionBefore plugging in, ensure that the voltage andfrequency shown on the serial number platecorrespond to your domestic power supply.Voltage can vary by ±6% of the rated voltage.For operation with different voltages, a suitably sizedauto-transformer must be used.ImportantThe appliance must be earthed.The power supply cable plug is provided with acontact for this purpose.If the domestic power supply socket is notearthed. connect the appliance to a separateearth in compliance with current regulations,consulting a specialist technician.The Manufacturer declines allresponsibility if the above safetyprecautions are not observed.For appropriate venting, follow indications in thefigure.50 mmmin.200 cm 2200 cm2min.D526