Zanussi ZI 2404 Instruction Booklet

Also see for ZBA 6160: Specification Specifications Instruction booklet

Contents

41D022121. Fit the appliance in the niche by making sure thatit stands against the interior surface of the unit onthe side where the door hinges of the appliancesare fitted. Insert the appliance until the upper stripbutts up against the unit (1) and make sure thatthe lower hinge is in line with the surface of theunit (2).2. Press in the joint covers between the applianceand the kitchen furniture.D1323. Open the door and push the appliance against theside of kitchen furniture opposite to that of theappliance hinges. Fasten the appliance with 4screws (I) provided in the kit included with theappliance.I6. Place guide (Ha) on the inside part of the furnituredoor, up and down as shown in the figure andmark the position of external holes. After havingdrilled holes, fix the guide with the screwssupplied.5. Separate parts Ha, Hb, Hc, Hd as shown in thefigure.4. Snap vent grill (B) and hinge cover (E) intoposition.Apply blanking covers (C-D) as indicated.BECDPR266Ha HbHcHd21 mm21 mmca. 50 mm90°90°ca. 50 mm

/ 12

Related manuals for Zanussi ZBA 6160