• WARNING: The appliance and its accessible parts become hotduring use. Care should be taken to avoid touching heatingelements. Children less than 8 years of age shall be kept awayunless continuously supervised.• Always use oven gloves to remove or put in accessories orovenware.• Before maintenance cut the power supply.• Ensure that the appliance is switched off before replacing thelamp to avoid the possibility of electric shock.• Do not use a steam cleaner to clean the appliance.• Do not use harsh abrasive cleaners or sharp metal scrapers toclean the glass door since they can scratch the surface, whichmay result in shattering of the glass.• If the mains power supply cable is damaged, it must bereplaced by the manufacturer, its Authorised Service Centre orsimilarly qualified persons to avoid an electrical hazard.• Excessive spillage must be removed before the pyrolyticcleaning. Remove all parts from the oven.• To remove the shelf supports first pull the front of the shelfsupport and then the rear end away from the side walls. Installthe shelf supports in the opposite sequence.• The means for disconnection must be incorporated in the fixedwiring in accordance with the wiring rules.Safety instructionsInstallationWARNING!Only a qualified person must installthis appliance.• Remove all the packaging.• Do not install or use a damaged appliance.• Follow the installation instruction suppliedwith the appliance.• Always take care when moving the applianceas it is heavy. Always use safety gloves andenclosed footwear.• Do not pull the appliance by the handle.• Keep the minimum distance from the otherappliances and units.• Make sure that the appliance is installedbelow and adjacent safe structures.• The sides of the appliance must stayadjacent to appliances or to units with thesame height.• The appliance is equipped with an electriccooling system. It must be operated with theelectric power supply.Electrical connectionWARNING!Risk of fire and electrical shock.• All electrical connections should be made bya qualified electrician.• The appliance must be earthed.• Make sure that the electrical information onthe rating plate agrees with the powersupply. If not, contact an electrician.www.zanussi.com 3