Zavio F531E User Manual

Also see for F531E: Quick installation guide

F531E & F731E User Manual Reboot: Click this bottom to reboot. A confirmation dialogue will appearand then click “OK” to process. It takes two minutes to reboot this IP Camera. Factory Default: Click this bottom to reset this IP Camera to the factorydefault setting. A confirmation dialogue will appear and then click “OK” toprocess. Don't turn off this IP Camera until the device reboots. Backup Setting: You can save the setting data of this IP Camera into a file.Click “Save” and follow the instructions on the browser to save the settingdata file to your specified location. Restore Setting: Download the saved setting data of this IP Camera. Click“Browse” and select saved file. Click “OK” and this IP Camera is adjustedaccording to the loaded data and then restarted. Firmware Update: Upgrade the device software. Click “Browse” andselect the file for upgrading. A confirmation dialogue will appear. Click “OK”to start upgrading. This IP Camera will reboot upon completion.Note:Use only upgrade files that are special for this IP Camera. Otherwiseproblems may occur. Don't turn off the IP Camera power or disconnectthe network until the upgrading is completed.Note:After upgrading new firmware, please execute “Factory Default” first tomake it work. Upload Language Pack: Upgrade the device language pack. Click“Browse” and select the file for upgrading. A confirmation dialogue willappear. Click “OK” to start upgrading. The upgrade is applied immediately.The default language is “English.”24