Zavio F531E User Manual

Also see for F531E: Quick installation guide

F531E & F731E User Manual IP Address: The IP address obtained at the PPPoE connecting withnetwork. User ID: Enter the user ID for authentication necessary for PPPoEconnections. Type it up to 64 characters. Password: Enter the password for authentication necessary for PPPoEconnections. Type it up to 32 characters. Re-type Password: Re-type the password to confirm. Obtain DNS server address automatically: Select this to obtain theaddress of DNS server automatically. Use the following DNS server address: Select this when you set the fixedaddress as the IP address of DNS server.Primary DNS server: Enter the IP address of the primary DNS server.Secondary DNS server: Enter the IP address of the secondary DNSserver.Note :1. PPPoE (Point-to-Point Protocol over Ethernet): PPPoE is a networkprotocol for encapsulating Point-to-Point Protocol frames insiderEthernet frames. PPPoE connection is used mainly with ADSL servicewhere individual users connect to the ADSL transceiver (modem) overEthernet work. It also widely used in XDSL. (digital affiliate line such asADSL, VDSL or SDSL)2. The IP Camera needs to be rebooted after it finishes changing thenetwork completely.3. The IP Camera with Intelligent IP Installer can’t be founded afterturning on the PPPoE and reboot.32