Zeiss S7 / OPMI VISU 160 Instructions For Use Manual

Version 6.0G-30-1528-en Page 11S7 / OPMI VISU 160 Safety Measures• Ensure that the installation requirements and the operation of the deviceconcur with the surgical conditions:– Minimum vibration– Clean environment– Do not use the device under extreme mechanical stressesElectrical safety • Always switch off the system before disconnecting it from / connecting itto line power, for cleaning its surface or if it will not be used for a pro-longed period of time.• Switch off the unit at the power switch if you notice any smoke, sparks orunusual noise. Do not use the system until it has been repaired by our serv-ice team.• A potential equalization connection can be found on the connection panel(see IEC 60601-1:2005). This makes it possible to connect other active de-vices to the same earth potential or it can be used for the redundant con-nection with the grounding conductor.• Do not use multiple sockets!• Never open the device! The device contains freely accessible live compo-nents. If you remove the housing, you run the risk of electric shock.• Do not touch the system if your body is electrostatically charged and thesystem is not grounded.• Please note the information on EMC (electromagnetic compatibility) in thechapter "System Data" on Page 185.Transport & Service • The device may only be moved over long distances (e.g. relocation, returnfor repair etc.) in its original packaging or in special return packaging.Please contact your dealer or ZEISS Service.• This system is a high-grade technological product. To ensure optimumperformance and safe working order, we recommend having it checkedby our service representative as part of regular scheduled maintenance.• In order to prevent any impairment of the device's safety due to age,wear, etc., the user must ensure that the device is subjected to the neces-sary safety checks (see section "Care and Maintenance").• Modifications and repairs of this device or any equipment operated to-gether with this device may only be performed by ZEISS service staff orother persons authorized by ZEISS.Optics and light • Never directly look into the sun with binocular tube, object lens or an eye-piece.