Zeiss Standard 25 ICS Operating Manual

Contents

Zeiss Standard 25 ICS Operating Manual Manual pdf 26 page image

Standard 25 ICS2-6 B 40-029 e 01/982.6 Attachment of specimen holder tomechanical stage 75x30 RThe Standard 25 ICS features the mechanical stage75x30 R with ceramic coating (2-6/6).The specimen is precisely moved in x and y usingthe user-friendly coaxial drive (2-6/4).The x/y gradation on the stage surface (2-6/5) withthe two vernier scales helps to relocate certainspecimen spots.The readily mounted specimen holder with springclip R (453536) (2-6/1) is part of the standardconfiguration.As an alternative, it is also possible to use- the specimen holder with sprig clip R (473448)(2-6/2)or- the specimen holder for one-handed operation(453548) (2-6/3). Here, the microscope slide (2-6/7) is insertedinto the specimen holder along the guidingedge, the spring clip is swung out and willautomatically clamp the microscope slide in itsstop position. The specimen holders can be easily exchangedin the x-direction using the two fixation screwson the guiding rail. Loosen the two fixationscrews, pull out specimen holder to the frontand insert new specimen holder until it engagesin the guiding slots. Tighten the two fixationscrews again.Fig.2-6 Attachment of specimen holder tomechanical stage 75x30 R