Zenith C32V23 Operating Manual & Warranty

Also see for C32V23 - 32" Flat-Screen Integrated HDTV: Service manual

P A G E 4 4 206-3767Mini glossaryPROGRAMMING Procedure to set up remote to operate other equipment.PRG Programming mode key.DEVICE CODE Code to control infra-red remote controllable electronic devices: TVs, VCRs, Cable Boxes, etc.Verify 3-Digit Code Stored in Mode12Use the following method described below to find the code number stored inmemory for each remote operating mode: TV, VCR, CABLE, and AUXPRG POWERCABLE VCR AUX TVSURF-FLASHBK MUTECHANNELCHANNELVOLUME VOLUME1 2 34 5 6708 9MENUREWIND F FWDRECORDENTERSIGNALAUDIOCCQUITSOURCEPAUSE TIMERPLAYSTOPRATIO VIDEO23Programming your Zenith remote may allow you to use one remoteto work up to 4 different devices, if all modes are programmed.Not all devices will work with your Zenith remote control.1With a small blunt object, press and hold PRG for about threeseconds. When the light turns on, release PRG.Press the mode button you want the 3-number code for, thenpress the TIMER button.The LED will blink the number of times to indicate the num-ber of the first digit. There will be a 1 second pause duringwhich the LED light will be off, then the LED will blink thenumber of times for the second digit of the code, and so on.For example:- One blink, no LED light for 1 second.- Three blinks, no LED light for 1 second.- Eight blinks.This is the example for code: 1-3-8.Note: Ten blinks indicate code number “0”.Indicator LightMode / Product CompatibilityTV VCR CATV AUXTVs VCRs Cable Boxes, All products on pp 46 - 47DVDs Satellite Receivers2