P A G E 1 2 206-3583InOutAudio Video3 4VCRBack AV panelA/V cablesnot includedwith TVCable TVwall jackRound wire(75ohm)RF coaxial wire(75ohm)AntennaS-VideoORAntennaRF coaxial wire(75ohm)Signal SplitterVIDEO 2INPUT VIDEO 1INPUTS-VIDEOINMONITOROUTANT/CABLE2INPUT ANT/CABLE1INPUTDTV/RFANTENNAINPUTRLRLS-VIDEOOUTVIDEO(MONO)(MONO)VIDEOLOOP OUT12VCRLocate the RF or VHF/UHF/CATV In jack onthe back of your VCR. Connect the cableline coming from your wall directly tothis jack.Find the composite video and audiojacks on the back of your VCR, and con-nect them following the instructionsprovided with your equipment.You may connect either the compositevideo or the S-Video cables to yourEntertainment Machine. (Do not con-nect BOTH the composite and the S-Video cables. In the event that youconnect both composite and the S-Video cables, only the S-Video willwork.)Turn to pages 26-27 to activate EZProgram for your analog signal and totune your DTV antenna.To hear stereo sound from cable or your VCR,you will need to connect A/V cables as well asthe wire that runs from the VCR to yourEntertainment Machine.If you want to receive your signals on Channel3 or 4, locate the Out to TV jack on your VCR.Connect a cable from the Out to TV jack to theAntenna/Cable 1 jack on the back of yourEntertainment Machine.3