Zenith IQB56W10G Operating Manual
                                                                        | |
Contents
|
More Mode FunctionsTurn on the device you wish to operate.On the remote control, press the devicebutton you wish to assign this device to,and the Mute button simultaneously.Note: “SET will appear in the LCD.Press the device button that correspondsto the actual device you plan to operate.Note: “SET” will appear in the LCD.Select the three digit code number fromthe code list found on pp 57-61 for thedevice you will be operating.Point the remote toward the device, andpress in the three digit code number.Note: “SET ###” will appear in the LCD.The device will turn off when the correctthree digit code number has been select-ed. Press the DEVICE button selected instep 2. This will store the three digitcode into that DEVICE button. Note:“PASS” will flash in the LCD.11 2 34 5 67 8 90record pause chapter chapterplaystoprewind fast fwdmenu enterquit ratiosurfflashbkpicturepowermuteinfo clearvcr +guidevideo dvdvcr cable audio auxtv satvol chpg uppg dwnantenna dbs223454/53The feature can be used to program the remote control for more than one TV, VCR, Satellite Receiver, etc. Thethree digit code for any device can be stored in any of the DEVICE buttons. For example: For two VCRs, the firstVCR can be stored in the VCR DEVICE button under normal set up procedures, and the second VCR can be pro-grammed into the unused CATV or any other DEVICE button.6P A G E 5 6 206-3583 |
Related manuals for Zenith IQB56W10G
manualsdatabase
Your AI-powered manual search engine