Zenith SY3238 Operating Manual & Warranty

Contents

GET TO KNOW THE REMOTE CONTROL: MBR 3457INTRODUCTIONThe remote control provided with your new TV is a "multi-brand" remote control. It will operate the common features ofmost, but not all, models and brands of IR (infrared) control-led TVs, VCRs, cable conveners, video disc players, andaudio equipment. The remote may provide functions that arenot available on your equipment, e.g., menu operations. Somefunctions of your particular equipment may not be controlledby this remote. In such cases, use the original remote controlfor your equipment.Mode Select KeysChannel/Volume ChangesNumber KeysOn-Screen Menu FunctionsPicture-In-Picture FunctionsVCR FunctionsBATTERY INSTALLATIONBatteries are provided, but they must be installed before using the remote control. When it no longer functions normally, or when itloses memory, replace the batteries with two high-quality, alkaline, size AAA batteries.Unless your equipment responds to the factory preset codes commonly used for Zenith products, i.e.., 101 for TV, 201 fi)r VCR,353 tot CABLE, and 401 for AUX., you will need to program the remote control with the codes for your particular equipment.To Install the batteries:1. Open the battery compartment by pressing in on the tab and lift-" ing the cover off.i2. Place the batteries into the compartment matching plus withplus (+ with +), minus with minus (- with -) with the markingsshown in the battery compartment.3. Replace the compartment cover.NOTES:U Do not to place heavy objects on top of the remote controlkeys. Prolonged unintentional operation of the remoteshortens battery life.Q Remove the batteries if the remote control will not be usedfor a month or more. Battery leakage can permanentlydamage the remote, for which Zenith is not responsible.Push tab in ?_CHOOSING OPERA TING MODETo control your TV, VCR, cable box, or auxiliary equipment withthis remote, you must firstchoose the mode of operatiou. Press thedesired mode key for'IV, VCR, CABLE or AUX. Note thatsome keys on the remote will always operate a particular productfunction regardless of which mode the remote is set to.