Zenith Z44SZ80 Installation And Operating Manual

Also see for Z52SZ80: Installation and operating guide Specifications Service manual Service manual Service manual

14 DLP Projection TVInstallationThe TV has a special signal output capability which allows you tohook up a second TV or monitor.Connect the second TV or monitor to the TV’s MONITOR OUTPUT.See the Operating Manual of the second TV or monitor for furtherdetails regarding that device’s input settings.Note• Component, RGB-PC/RGB-DTV, HDMI1/DVI,HDMI2, DTV inputsources cannot be used for Monitor out.Monitor Out SetupMonitor Out SetupS-VIDEO IN(R) AUDIO (L) VIDEOPC/DTV(XGA/480p/720p/1080i)S-VIDEOMONORGB INPUTRGB/DVI INPUT(L)(R)AUDIO(L)(R)AUDIOMONITOROUT INPUT2 INPUT1VARIABLEAUDIO OUTHow to connectUse the TV’s COMPONENT (Y, P B, PR) INPUT, RGB, HDMI1/DVI orHDMI2 jack for video connections, depending on your set-top box connec-tor. Then, make the corresponding audio connections.Note: HDMI(High Definition Multimedia Interface): Input that accepts uncom-pressed digital signal and multi channel digital audio signal.How to use1. Turn on the digital set-top box. (Refer to the owner’s manual for the digitalset-top box.)2. Use TV/VIDEO on the Remote Control to select Component 1,Component 2, RGB-DTV, HDMI1/DVI or HDMI2 source.HDSTB SetupHDSTB Setup- This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digitalsignals from a digital set-top box or other digital external device, refer to the figure as shown below.- This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents (480p,720p,1080i).Signal480i480p720p1080iComponent 1/2YesYesYesYesRGB-DTV,HDMI1/DVI,HDMI2NoYesYesYes