Zenith Z44SZ80 Installation And Operating Manual

Also see for Z52SZ80: Installation and operating guide Specifications Service manual Service manual Service manual

Owner’s Manual 23Operation- Changes the picture source so you can watch your off-air TV, cable TV, VCR,DVD, or any other devices that are connected to your TV.1. Press the MENU button and then use D / E button to select the SETUP menu.2. Press the G button and then use D / E button to select Main Input.3. Press the G button and then use D / E button to select the source: Antenna,Cable, Video1, Video2, Front Video, Component1, Component2, RGB-DTV (orRGB-PC), HDMI1/DVI or HDMI2.4. Press EXIT button to return to TV viewing or press MENU button to return to theprevious menu.Main Picture Source SelectionMain Picture Source Selection1. Press the MENU button and then use D / E button to select the SETUP menu.2. Press the G button and then use D / E button to select Input Label.3. Press the G button and then use D / E button to select the source: Video1,Video2, Front Video, Component1, Component2, RGB, HDMI1/DVI or HDMI2.4. Press EXIT button to return to TV viewing or press MENU button to return to theprevious menu.Input LabelInput Label- Choose preset labels for your channels.- If a channel label is provided on the signal from the broadcasting station, the TV displays a short name for a DTV chan-nel - even if you didn't preset a label for the channel.1. Press the MENU button and then use D / E button to select the SETUP menu.2. Press the G button and then use D / E button to select Channel Label.3. Press the G button. You will now see a screen filled with Labels and a preview screen.4. Use the CH D / E button to select a channel to Label.5. Use D / E / F / G button to select the appropriate label for the channel, then press ENTER button to set the Label tothe selected channel.- If you press ENTER button in TV viewing mode, you will see the channel banner.Channel Label SetupChannel Label SetupCADTV 27-1CNNDolby Digital HD