Zenith Z44SZ80 Installation And Operating Manual

Also see for Z52SZ80: Installation and operating guide Specifications Service manual Service manual Service manual

- You can create two different types of channel lists in memory: “Custom List”and “Favorite List” from the default channel list created from the EZ Scanchannel search.- A Custom List can be created by toggling each channel on or off with ENTERbutton. The channels in the Custom List are displayed in black color, and thechannels deleted from the Custom List are displayed in gray color. Once achannel is highlighted you can add or delete the channel by referring to thesmall window at the top-left corner of the screen.You can also create your ownFavorite List.Use the FAV button on the Remote Control when a channel is highlighted andthen you can add or delete the channel to/from the Favorite List.1. Press the MENU button and then use D / E button to select the SETUP menu.2. Press the G button and then use D / E button to select Channel Edit.3. Press the G button. You will now see a screen filled with channel numbers anda preview picture.4. Use D / E / F / G button to select a channel and then use the ENTER button toadd or delete it. Press FAV to add or delete the channel to the Favorite List.5. Press EXIT button to return to TV viewing or press MENU button to return to theprevious menu.Channel EditChannel EditNote:• When a cable box connects to the physical channel 2, 3, or 4 in TV Guide On Screen Setup, cable channels(CATV orCADTV) will not be editable by Channel Edit. Instead, use the cable box's Channel Edit if available.22 DLP Projection TVOperation- Automatically finds all channels available through antenna and cable inputs, and stores them in a channel list in the memory.- Run EZ Scan again after any Antenna/Cable connection changes.- A password is required to gain access to EZ Scan menu if the Lock System is turned on.1. Press the MENU button and then use D / E button to select the SETUP menu.2. Press the G button and then use D / E button to select EZ Scan.3. Press the G button or ENTER button to begin the channel search.Allow EZ Scan to complete the channel search cycle for TV, DTV, CATV, and CADTV.EZ Scan (Channel Search)EZ Scan (Channel Search)Setup Menu OptionsSetup Menu Options