Zip Hydrotap G4 Series Installation Instructions Manual

Also see for HydroTap G4 Series: Installation instructions Installation instructions Installation instructions Installation instructions User manual

Contents

07INSTALLATION I N STRUCTIONS803341UK V1.04 NOV 2017 - ZIP G4 TAP RANGETECHNICAL SUPPORT TEL: 0345 6 005 005 EMAIL: SERVICE@ZIPINDUSTRIES .CO.UKWWW.ZIPWATER.CO.UKSECTION 1 CLASSIC & ELITE HYDROTAP G4 INSTALLATIONBlackplastic spacer1.3 Mount the tapPass the tubes and USB cable throughthe Ø35mm hole.1.4 Secure the tapØ35mm holeNote Feed each of the tubes and USB cableevenly in between the legs of the spiderclamp during installation.Fit thestainless steelwasher,spider clamp,and secure withnut.NutSpider clampStainless steelwasher1.5 Connect the water supply (detail shown, disassembled and assembled)Braided hoseto Command-Centre(supplied)15mm compressionto ½” male BSP (notsupplied)Filter(supplied)Isolation valve(not supplied)Incomingmains ambientwater supplyMale - Femaleadaptor(supplied)Connecttogether! Note correct filterorientationIncomingmains ambientwater supplyBraided hoseto Command-Centre