janitza UMG 96-PA User Manual

Also see for UMG 96-PA: Installation manual User manual and technical specifications Installation manual Installation instructions Installation instructions

Contents

janitza UMG 96-PA User Manual Manual pdf 60 page image

UMG 96-PA www.janitza.de6013. 13 Analog outputThe device has 1 passive analog output,which can output a maximum current of 0 -20 mA.An external 24 V DC power adapter is re-quired for operation.20 mA4 mA230 VInitial value250 VFinal valueFig.: Principle of the analog output withvoltage monitoringThe analog output can be configured in auser-friendly way via the GridVis® software.To do this, enter the assigned measurementvalue, the initial and final value and the outputrange in "Periphery."Fig. Configuration of the analog output in the Grid-Vis® softwareExamples:Assignment of effective power L1(output range 4 - 20 mA)20 mA4 mA500 WInitial value1000 WFinal value• If the effective power is 500 W, a current of4 mA is outputted via the analog output. Atan effective power of 1000 W, the output is20 mA.The measured effective power is directlyproportional to the current of the analogoutput.Assignment of the calculated effective powerfactor cos ϕ (math.)(output range 4 - 20 mA)20 mA4 mAcos ϕ = -1Initial valuecos ϕ = 1Final value20 mA0• Monitoring of the effective power factorcos ϕ (math.) withcos ϕ (math.) > 0effective power, consumedcos ϕ (math.) < 0effective power, delivered.