lamber PRL-C Instruction Manual

Contents

lamber PRL-C Instruction Manual Manual pdf 19 page image

19and the others filter F4,F2 and F1.10 - Reassemble the curtains in the right placeensuring that:The curtains must have the shorter side facingthe entry of the baskets, (see the signallingblue stamps placed on the doors) (see drawpag.10)11– Clean the outside of the machine with awet sponge. Never use water jets because,besides being dangerous, they can damagethe electrical parts. Never use detergents,abrasive stuffs, rough sponges or steelbrushes.12 – In order to avoid the formation of nastysmells, let the doors open making surethat they are firmly linked to theapposite supports.Machine prolonged stopIn case the machine is not used for someweeks it is advisable to carry out an accuratecleaning of all components inside to avoid theformation of unpleasant smells.In case of a very long standstill, it is advisableto oil the stainless steel surfaces with whitemineral oil.ACHIEVEMENTSAny deficiency in the washing process isapparent when dirty residuals are visible. Anyhalos might be caused by an insufficuentrinsing: in this case, check that the rinsing jetsare clean and there is a sufficient pressure inthe water distribution network (2÷4 bar) ;In the case that residuals are present, checkthat:• the washing jets are clean• pre-washing temperatur is 40 °C maximum;• washing temperature is from 55 to 60 °C,• rinsing temperature is from 80 to 85 °C,• there is detergent in the right concentration;• the filters are clean;• washing water is not dirty;• the positions of the objects in the rack arecorrect.IMPORTANT: Before carrying out cleaning andmaintenance operations disconnect themachine from the power supply source bymeans of the wall-mounted switch or by meansof the disconnecting switch located on thecontrol panel.