25PRL-CSecond Section - FOR THE INSTALLERThe following instructions are addressed to qualified personnel who is the only one authorizedto carry out the inspections and the necessary repairs.The machine should be installed in “Normal” environment that is to say, indoors, free of dust,explosion-proof and adequately lit and well aired.Before installing the machine, it is necessary to arrange the power and water connections.See the reported wiring diagram (supplied by the manufacturer) of the selected model as faras the dimensions of pipes, cables and wall-mounted switch concerns.In order to prevent damages caused by the escape of vapours from the equipment makesure that adjacent materials do not deteriorate in their presence.The Manufacturer cannot assume any responsibility for any damage to persons orproperty deriving from the non-observance of the above specified norms.DISPOSALAt the end of its life, the machine shall be disposed according to the local laws in force force byspecialized and acknowledged companies in this field. Its components shall be distinguished asfollows:- metallic components: body, plans, frames, filters;- electric components: motors, remote control switch, microswitches, wiring;- plastic components: baskets, connections;- rubber components: hoses, sleeves.