lamber PRL-C Instruction Manual

Contents

lamber PRL-C Instruction Manual Manual pdf 7 page image

7USE OF CHEMICAL PRODUCTS (detergents, sparkling aid)CAUTION: Observe the safety notes and dosage data for the use of chemicals. During the use of the chemicalsubstance wear protective clothing, gloves and protective glasses. Do not mix different cleaning products.- Observe the safety notes indicated and the dosage recommendations for the use of chemicals.- When using chemicals, wear protective clothing, gloves and goggles.- Use only suitable products for industrial dishwashers directly recommended by Lamber.- Do not mix cleaning products to avoid crystallization that could ruin the detergent dispenser.- Do not use products that create foam as hand soap or detergent for manual washing.These products should not be introduced into the machine not even by pre-treatment of dishes.Attention. During the use of chemicals is advisable to wear appropriate clothing, such as gloves andprotectives glasses.UNPACKING AND DELIVERY CHECKSWhen the case with the machine has been received, unpack it as follows:- Remove the upper cover and the wooden case side walls, take care not to damage the machine,- Remove possible accessories boxes,- Remove the protecting cellophane,- Make sure that the machine has not been damaged during transport,- Make sure that all covers and panels have been correctly fixed and that no loosen part is present,- Visually inspect that all electrical components are integral.TRANSPORT AND INSTALLATION- To lift and transport the machine, insert the truck forks under the frame connected to the points indicated bythe yellow adhesives applied on the machine front side (see draw below).disforchem115draw“A”- Before plugging the machine, make sure that the supply voltage of the domestic wiring system and the watersupply from water connection corresponds to the ones reported on the rating plate- Installation should be carried out by qualified personnel according to the manufacturer's indicationsDuring instalation, it is recommended to level the machine in order to ensure a correct operation.