u-blox SARA-R4 Series System Integration Manual

Contents

SARA-R4 series - System Integration ManualUBX-16029218 - R06 ApprovalsPage 85 of 1024.2.3 ModificationsThe FCC requires the user to be notified that any changes or modifications made to this device that are notexpressly approved by u-blox could void the user's authority to operate the equipment.Manufacturers of mobile or fixed devices incorporating the SARA-R4 series modules areauthorized to use the FCC Grants of the SARA-R4 series modules for their own final productsaccording to the conditions referenced in the certificates.The FCC Label shall in the above case be visible from the outside, or the host device shall bear asecond label stating:o For SARA-R404M modules: "Contains FCC ID: XPY2AGQN1NNN" resp.o For SARA-R410M-01B modules: "Contains FCC ID: XPY2AGQN4NNN" resp.IMPORTANT: Manufacturers of portable applications incorporating the SARA-R4 series modulesare required to have their final product certified and apply for their own FCC Grant related tothe specific portable device. This is mandatory to meet the SAR requirements for portabledevices.Changes or modifications not expressly approved by the party responsible for compliance couldvoid the user's authority to operate the equipment.Additional Note: as per 47CFR15.105 this equipment has been tested and found to comply withthe limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try tocorrect the interference by one or more of the following measures:o Reorient or relocate the receiving antennao Increase the separation between the equipment and receivero Connect the equipment into an outlet on a circuit different from that to which the receiveris connectedo Consultant the dealer or an experienced radio/TV technician for help4.3 Innovation, Science and Economic Development Canada noticeISED Canada (formerly known as IC - Industry Canada) Certification Numbers: u-blox SARA-R410M-01B cellular modules: 8595A-2AGQN4NNN4.3.1 Declaration of ConformityThis device complies with Part 15 of the FCC rules and with the ISED Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions: this device may not cause harmful interference this device must accept any interference received, including interference that may cause undesired operation