vacuubrand DCP 3000 Instructions For Use Manual
Also see for DCP 3000: Instructions for use
                                    | |
Contents
| 
page 11 of 36Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefullythe validity of this document with respect to his product. Manual-no.: 999162 // 19/01/2011warning notice (if necessary in combination with other symbols), flashingventing valve switched on (if connected)mbarTorrhPa preselected pressure unit1013.2 actual absolute pressure at the pressure transducerVSK 1 / VSP 1 active pressure transducer (status line)Use and operationWhen switching on the DCP 3000 for the very first time, a menu to select the language of the device isdisplayed. Select the desired language (e.g. ”English”) by turning the selection knob and press to con-firm. Then select the pressure unit (”mbar”, ”Torr” or” hPa”) in the same way.It is possible to access the language selection menu at any time by switching on the device whilekeeping the selection knob pressed.After switching on, the version number of the software is displayed.The connected components (valves, external sensor) are identified and configurated automatically.Assembling the country specific mains plug☞ The wall power supply is delivered with mains plugs forEurope, UK, USA and Australia.☞ To replace the mains plug press the locking key and re-move mains plug.☞ Assemble the suitable mains plug to the power supply andlock.Display and symbolsmbar1013.2mbarVSK 11.0 x 10 3mbarVSP 1 |
Related manuals for vacuubrand DCP 3000
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine