vacuubrand DCP 3000 Instructions For Use Manual
Also see for DCP 3000: Instructions for use
                                    | |
Contents
| 
page 24 of 36Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefullythe validity of this document with respect to his product. Manual-no.: 999162 // 19/01/2011XXXXXDCP 3000 Vx.xxXX:XXXX:XXmalfunction IN_ERRIN_VERIN_SP_1IN_SP_2Descriptionunit according to preselectionspressure of pressure transducer x (or-der of numbering like display in menu”Sensors”pressure of all connected pressuretransducersread out data to memory mediumResponseXXXX.X mbar/Torr/hPaX.XXE±X mbar/Torr/hPaXXXX.X mbar/Torr/hPaX.XXE±X mbar/Torr/hPaXXXX.X XXXX.X ...mbarX.XXE±X mbar/Torr/hPaXXX.XX:XX:XX X ...mbarXXXXXXXFunctionactual pressurepressuredevice setpreselectionsCommandIN_PV_1IN_PV_SxIN_PV_XIN_PV_DIN_CFGRead commands0: last command to serial interface correct1: last command to serial interface incorrect0: no external fault1: external fault0: no fault at the pressure transducer1: fault at the pressure transducer0: no overpressure1: overpressure0: no fault at the venting valve1: fault at the venting valve1.......8: quantity of pressure transducers1.......8: number* of active pressure transducer0: fault indicator not connected1: fault indicator connected0: venting valve not connected1: venting valve connected0: acoustic signal off1: acoustic signal on0: pressure unit mbar1: pressure unit Torr2: pressure unit hPa0......D: language** (hexadecimal)software versiontime interval for sending mm:sstime interval for recording* numbering correspondsto order of pressuretransducers in the con-figuration menu** Language:0: German1: English2: French3: Italian4: Spanish5: Turkish6: Korean7: Chinese8: Portuguese9: RussianA: PolishB: DutchC: JapaneseD: Finnish |
Related manuals for vacuubrand DCP 3000
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine