vacuubrand DCP 3000 Instructions For Use Manual

Also see for DCP 3000: Instructions for use

vacuubrand DCP 3000 Instructions For Use Manual Manual pdf 28 page image

page 28 of 36Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefullythe validity of this document with respect to his product. Manual-no.: 999162 // 19/01/2011Instructions for repair with directions for repair and spare parts list is available onrequest.☞ The instructions are for trained service people.NOTICEAccessoriesConversion of a VACUUBRAND valve with diode plug to a VACUUBRAND valvewith VACUU•BUS plug:Pressure transducer VSK 3000, capacitive Al 2O3 sensor 1080-0.1 mbar ...................................636657Pressure transducer VSP 3000 Pirani, 1*103 - 1*10-3 mbar 636163Vacuum gauge head MPT 100 Penning/Pirani, 1*103 - 5*10-9 mbar 683176Connection cable SUB-D - VACUU•BUS for MPT 100 636124Venting valve VBM-B / KF 16 or hose nozzle 6/10mm, 24 V= ....................................................674217Y-type adapter VACUU•BUS ........................................................................................................636656Extension cable VACUU•BUS, 2m ..............................................................................................612552Extension cable VACUU•BUS, 10m ..........................................................................................2618493Wall bushing VACUU•BUS ..........................................................................................................636153Cable RS 232C, 9-pole, Sub-D .....................................................................................................637837Digital-I/O-Module VACUU•BUS (fault indicator) .........................................................................636228Analog-I/O-Module VACUU•BUS(analog voltage output of vacuum reading) ...................................................................................636229PC-Software VACUU•CONTROL.................................................................................................692920VACUUBRAND valve with diodeplugConversion kit ”valve cable withVACUU•BUS plug”Venting valve VBM, 24 V= (666817) 612554Fault Possible cause Remedy❑ Displayed pressure valueis fluctuating.➨ Pressure transducer VSP3000 was exposed to a sig-nificant pressure change or achange of position.✔ Allow the pressure trans-ducer to stabilize.➨ Pressure measurement withVSP 3000 at pressures above50 mbar?✔ Fluctuations within the rangeof the measurement uncer-tainty. Use pressure trans-ducer VSK 3000.❑ Pressure reading incor-rect.➨ Connected pressure trans-ducer configured incor-rectly or several pressuretransducer with identicalVACUU•BUS address con-nected?✔ Reconfigure pressure trans-ducer.❑ Second pressure trans-ducer connected but notdetected by the DCP3000.➨ Second pressure transducernot or incorrectly configured?Both pressure transducersconfigured to the same ad-dress?✔ Configure second pressuretransducer.❑ Display and warningtriangle are flashing.➨ Data storage in function datalogger is full.✔ Read out data and startagain if necessary.