3 USING THE AUTO LINKFEATURE FOR NET WAREThe AutoLink auto installation feature for NetWare configuresthe adapter as a NetWare DOS ODI client. The AutoLinkinstallation steps are depicted in Figure 3-1.Figure 3-1 AutoLink Installation ProcessThis chapter describes the AutoLink program requirements,ways to avoid memory conflicts, and installation steps. SeeChapter 5 for other NetWare and NDIS operating systeminformation and see Chapter 6 for information about installingthe network driver for Windows NT and Windows 95.The AutoLink program performs the following functions:n Configures the 3C619C adapter.n Tests the adapter.n Installs the DOS ODI client driver.InsertTokenDisk diskette.Make diskette drive active.Remove disketteand reboot computerType: AUTOLINKSelect ring speed andconfiguration modeIf memory manager is installed,exclude memory rangeD8000 – DBFFF
