5-12 CHAPTER 5: INSTALLING NETWORK DRIVERSDisabling RPLTo disable RPL:1 Boot your PC under DOS.2 Make sure that the backup copy of the TokenDisk disketteis in a floppy drive on your PC.3 At the diskette prompt, type:3TOKDIAG [Enter]4 From the Install pull-down menu, select Configure Adapter.5 Using the arrow keys, move to Boot PROM.6 Press [Enter] and select Disable.7 Press [Enter].8 Select OK and press [Enter] to save the setting.9 Remove the diskette from the drive and reboot the PC.This completes the description of how to use RPL with the3C619C adapter.
