Updating the Current NDIS Driver 5-9Updating the Current NDIS DriverIf you are updating an existing NDIS driver (rather thaninstalling one for the first time), follow these steps:1 From the main menu, select Network Drivers and press[Enter].2 Select NDIS Driver Installation and Information.3 Select Update NDIS Driver and press [Enter].This option will update your current driver to the latestversion. The NDIS 2.01 drivers are TLNK3.DOS and TLNK3.OS2.4 Exit the program and remove the TokenDisk diskette.5 Reboot your PC.This completes the procedure for updating the NDIS 2.01 drivers.Using IBM DriversThe 3C619C adapter is fully IBM-compatible. Because of this,the 3C619C adapter can use the same drivers as IBM 16/4Token Ring Adapters.Obtaining IBM Network DriversObtain IBM token ring drivers for the 3C619C adapter in oneof the following ways:n Copy IBM 16/4 Token Ring Adapter drivers supplied with yournetwork operating system.n Use the Remote Program Load (RPL) program to download IBMdrivers from the network. Follow the procedures described inthe next section, “Using Remote Program Load (RPL).”n Use the IBM 16/4 Token Ring Adapter drivers that accompanythe latest version of IBM’s LAN Support Program.With IBM drivers, use only IBM mode settings.