Auto Configuring the 3C619C Adapter in an ISA PC 4-33 Place the TokenDisk diskette in a floppy drive on your PCand make that drive the active drive. For example, type:A: [Enter]4 Type at the prompt:INSTALL [Enter]5 The first time you use the diskette to install the adaptersoftware, a software license screen appears. To accept theterms and conditions of the 3Com end-user softwarelicense agreement, type:YTo view the full text of the license agreement, press [F1].6 Read the next screen and press [Enter].7 When the main menu shown in Figure 4-2 appears, selectAuto Configure 3Com ISA Adapter.Figure 4-2 Main Window with Auto Configure SelectedESC=Cancel F1=HelpTokenDisk for the TokenLink III AdapterM A I N M E N U[ENTER]=Execute Function[↑↓]=Scroll[F1]=Help [ESC]=Auto Installation with Configuration (AutoLink)NetWare DOS ODI ClientStandard Installation and ConfigurationAuto Configure 3Com ISA AdapterNetwork Drivers ...Configuration/Diagnostic/Troubleshooting ...General Information/Release NotesAutomatically configures the adapter to non-conflicting settings
