When Tests Fail 7-11The following information is displayed on the screen,indicating what to do when the specific test fails.MMIO Register Write/Read Test Failuren Check the ROM base address setting on the adapter andmake sure that it is not being used by another device.n Run the test three times with a delay of at least 30 secondsbetween each test. If the error persists, power down the PCand try once more.Boot PROM Test Failuren Check the ROM base address setting on the adapter andmake sure that it is not being used by another device.n Refer to the “Configuration Options” section in Appendix Bfor more information.AIP Checksum Test Failuren Check the ROM base address setting on the adapter andmake sure that it is not being used by another device.n Run the test three times with a delay of at least 30 secondsbetween each test. If the error persists, power down the PCand try once more.Shared RAM Boundary/Domain Test Failuren Make sure the RAM base address is aligned according to theselected shared RAM size.n Make sure the shared RAM address does not conflict with theadapter ROM or another device.
