166 CHAPTER 14: MANAGING S YSTEM F ILESActivating ImageFilesThe Active Image Page allows network managers to select and reset theImage files. The Device Boot is downloaded onto the device through theCLI.To upload System files:1 Click Administration > Firmware Upgrade > Active Image. TheActive Image Page opens:Figure 94 Active Image PageThe Active Image Page contains the following fields:■ Active Image After Reset — The Image file which is active on theunit after the device is reset. The possible field values are:■ Current Image — Activates the current image after the device isreset.■ Backup Image — Activates backup image after the device is reset.2 Select the active image to be activated after reset.3 Click Apply. The active image file is defined, and the device is updated.
