291 While you are on a call, press the Hold button. This message appears in the DisplayPanel: Hold2 To return to the call, press the Hold button again or press the appropriate Accessbutton.Music on HoldIf configured by the administrator, callers on hold hear music while they wait.The VCX system’s WAV file importing capabilities are solely an accommodation toyou and shall not constitute a grant or waiver (or other limitation or implication) of anyrights of the copyright owners in any audio content, sound recording or underlyingmusical or literary composition. Therefore, please be mindful that you are obligated tocomply with all applicable copyright and other intellectual property laws in bothuploading WAV files to the VCX system and your subsequent use of such WAV files.Dialing a New Call While on a CallYou can put a call on hold, dial a new call, and toggle between the two calls:1 Press the Hold button.2 Press one of the Access buttons not currently being used.3 When you hear dial tone, dial the second call.Answering a New Call While on a CallYou can put your current call on hold, answer a second call, and then toggle betweenthe two calls:1 When a new call arrives, press the Hold button to put the current call on hold.2 Press the Access button for the incoming call (its light will be flashing).3 To toggle between the two calls, put the current call on hold and then press the Accessbutton for the call you want to resume.Transferring a CallWhen you are on a call, the Transfer feature allows you to send the call from yourtelephone to any other internal line. For unattended or attended transfers, if your callpermissions allow, you can send the call to an external line.If your telephone is part of a bridged extension, see Call Forward, Forward to VoiceMail, and Bridged Line Calls for additional information.You can also transfer a call to another subscriber’s voice mail. See Transferring a Callto Another User’s Voice Mail.Unattended TransferIn an unattended transfer, you transfer the call without notifying the recipient. You caneither use the Transfer button or the transfer feature code: