3Com 3C3FE574BT User Manual
Also see for 3C3FE574BT: Quick start guide
                                              | |
Contents
| 
14 CHAPTER 4: SETUP FOR WINDOWS NTInstalling the NetworkInterface1 Connect to the network and insert the LAN card as described in “Connecting thePC Card and Using the Utilities” on page 19. The system will find the card anddisplay a PCMCIA Card Not Configured dialog box.2 Select Install the driver that was provided with the PC Card.3 Insert the Installation CD and click OK. Use the path d:\install\disks\574BT, whered: is your CD-ROM drive.4 Set the I/O Port, Memory Address, Interrupt, and Duplex Mode (the default valueswork in most instances) as required for your site and click Continue.5 Set the Microsoft TCP/IP Properties as required for your site and click OK. Thesystem will display a dialog box called PCMCIA Reboot Needed.Consult with your MIS representative if you do not know what settings to use.6 Once the procedure is completed, reboot for the changes to take effect.Installation UsingSystem Soft SoftwareFor setup using System Soft Card and Socket Services:1 Connect to the network and insert the LAN PC Card as described in “Connectingthe PC Card and Using the Utilities” on page 19. The system will find the card anddisplay a PCMCIA Card Not Configured dialog box.2 Click Correct. Use the path d:\install\disks\574BT, where d: is your CD-ROM drive.The card wizard for Windows NT will appear with instructions for installing thecard.3 Click OK and continue with the procedure described for “Installation Using PointEnabler” on page 14.Installation UsingPoint EnablerPoint-enabler installation is a basic, manual installation procedure that will workon nearly all configurations, including systems with System Soft Card and SocketServices installed. If you are running the Softex software on your system, use theprocedures for “Inserting the PC Card and Running the Installation” on page 13.Installing the NetworkInterfaceBefore installing the network interface, insert the LAN card and connect to thenetwork as described above. Obtain the following information from your MISdepartment: For Windows NT networking, your computer name and workgroup ordomain name. For your network account, your user name and password.The LAN card requires that Service Pack 3 (or a later version) be installed on yourcomputer. Contact your network administrator or Microsoft if you do not haveService Pack 3 or later. |
Related manuals for 3Com 3C3FE574BT
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine