3Com 3C3FE574BT User Manual
Also see for 3C3FE574BT: Quick start guide
                                              | |
Contents
| 
Installation Using Point Enabler 15No Networking InstalledThis procedure assumes that you have not already installed Windows NTnetworking on your notebook computer. If networking is installed, see“Networking Already Installed” on page 16.1 In the Control Panel, double-click Network.2 When the system prompts: ”Windows NT Networking is not installed. Do youwant to install it now?”, click Yes. This opens the Network Setup Wizard.If the Network Setup Wizard does not appear, refer to “Networking AlreadyInstalled” on page 16.3 Check Wired to the network and click Next.4 When the system prompts to have setup start searching for a network adapter,click Select from List.5 Click Have Disk. Insert the LAN PC Card Installation CD (disk) in the CD-ROM driveand click OK. Use the path d:\install\disks\574BT, where d: is your CD-ROM drive.6 When the Select OEM Option window opens, select FE574 - 3Com 10/100 LAN PCCard-Fast Ethernet and click OK.7 The Network Adapters list shows a check mark next to the 3Com LAN card. ClickNext to continue.8 In the Network Protocols list, place a check mark next to each network protocolrequired for your site and click Next.9 In the Network Services window, place a check mark in the box next to eachdesired service. Unless you are following specific guidelines from your MISdepartment, select the default settings.10 Click Next to install the selected components.11 When prompted, enter the path to the Windows NT installation files (for example,D:\i386 on the NT CD) and click Continue. The window will appear again with thefields blank.12 Remove the NT CD and insert the LAN PC Card Installation CD in the CD-ROMdrive and click OK.13 Specify the path d:\install\disks\574BT, where d: is your CD-ROM drive, and clickContinue.14 In the 3Com LAN card dialog box, accept the default settings and click Continue.Depending on your computer’s current settings, a TCP/IP setup windows mayappear. Select the options that are required for your site and continue.15 When the window for enabling or disabling protocols opens, click Next.16 When NT is ready to start the network, click Next to copy the network files.17 Provide your computer name and workgroup or domain name when prompted.18 When the system displays “Networking has been installed on your computer,”click Finish.19 When prompted to reboot the computer, remove the LAN card Installation CDfrom the CD-ROM drive and click Yes. |
Related manuals for 3Com 3C3FE574BT
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine