3Com 3C3FE574BT User Manual
Also see for 3C3FE574BT: Quick start guide
                                              | |
Contents
| 
8 INSTALLATION FOR WINDOWS FORWORKGROUPSBefore You Begin Before you begin installing the network driver, obtain the Installation Disk and theWindows for Workgroups 3.11 installation files (on hard disk, floppy disks, or CD).Ask your MIS department for the following information: Transport protocol used in the Microsoft Windows Network Name of the NT Server domain or Windows 95/WFW 3.11 Workgroup towhich you belongThe latest versions of Card and Socket Services must be installed on your machine.Check with your PC manufacturer if you are not sure.If you installed any other network adapter or network driver in the PC, consultyour MIS department for further instructions.Installing the NetworkDriverTo install the driver for WFW, follow these steps:1 Using the Windows menu, select Network.2 Select Network Setup.3 In the Network Setup dialog box, select the Networks... button.4 Select Install Microsoft Windows Network, and then click OK.5 Select the Drivers... button.6 In the Network Adapters dialog box, click Add Adapter. A dialog box appears,listing the supported network adapters on the disk.7 From the list of network adapters, select Unlisted Or Updated Network Adapter,and click OK.8 Insert the LAN Installation Disk in drive A and click OK. A dialog box appears,prompting you to specify the drive or directory where the EL3C574.DOS driver canbe found.9 Click OK to accept the default directory. Otherwise, if you need to specify thedirectory, type a:\NDIS2 and press Enter.10 Select FE574BT-3Com 10/100 LAN PCCard-Fast Ethernet and click OK.11 Click OK.12 In the Network Adapters dialog box, click Close.13 In the Network Setup dialog box, click OK. |
Related manuals for 3Com 3C3FE574BT
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine