Installing and Configuring the NetWare Driver5913 Press Insert.The Select From the List of Configured Protocols screen appears.For NetWare 5.x: The default To a Network Interface is selected. Press Enter.The Select a Configured Network Interface screen appears. Select the board. For example, enter: 3c99x_1, and then press Enter.14 When prompted, enter the network number, and then press Enter.15 In the Frame Type field, press Enter to display a list of frames, choose a frame, andpress Enter.16 Press Esc.You are prompted to save the changes.17 Press Enter to save the changes.The configured Protocol to Network Interface Bindings screen appears.18 Press Esc to Exit.The Main menu appears. NetWare 4.11: Restart the server. NetWare 5.x: Select Reinitialize System. Press Enter to reinitialize.19 Press Esc to exit from the program.Installing the Server Driver and Advanced Server Features UsingAUTOEXEC.NCFYou can also install the server driver by editing (or adding new) LOAD commands in theAUTOEXEC.NCF file.With NetWare installed and the server up and running, complete the following steps toinstall and configure the driver and 3Com Advanced Server technology server features ona NetWare file server.In NetWare screens, use the arrow keys to select an item, and then press Enter.Loading the 3Com EtherCDNetWare 4.11 Insert the CD in the CD-ROM drive and enter these commands:load cdromcd mount ecd200p99xNetWare 5.x Insert the CD in the CD-ROM drive and enter this command:load cdromWait for the message that states the CD is mounted successfully, and thenproceed to copy the driver.
