44 CHAPTER 3: QUICK SETUP FOR THE F IREWALLUsing an IP Addressprovided by a PPPoEServerSelect the Provided you with two or more IP addresses option and clickthe Next button. The Firewall’s ISP Settings (PPPoE) screen will bedisplayed as shown in Figure 15 below.Figure 15 Configuring the Firewall’s PPPoE settingsEnter the User Name and Password as supplied by your ISP and click theNext button to proceed to the final part of the configuration. See“Configuring LAN Settings” on page 44.Using a Static IPaddress provided by aDHCP ServerSelect the Automatically assigns you a dynamic IP address (DHCP) optionand click the Next button. If a DHCP server is detected the Firewall willobtain its IP address automatically and will enable NAT for all devicesconnected to the LAN port. Click the Next button again to confirm yourchoice and proceed to the final part of the configuration. See“Configuring LAN Settings” below.Configuring LANSettingsOnce the WAN setting of the Firewall have been configured, theInstallation Wizard configures the Firewall’s LAN settings. Some of thefollowing processes are optional and screens will only appear if they arerelevant to the configuration of your Firewall.Automatic LANSettingsThe Installation Wizard checks for the presence of a DHCP server on theLAN port.DUA1611-0AAA02.book Page 44 Thursday, August 2, 2001 4:01 PM
