RMON Configuration Commands 493Description: The 1.3.6.1.2.1.16.1.1.1.4.1 defined in alarm table 1,less than(or =) 100 with alarm value 0. Alarm sample type isabsolute.Generates eventLog 1.2 at 0days 00h:02m:27s.Description: The alarm formula defined in private alarm table 1,less than(or =) 100 with alarm value 0. Alarm sample type isabsolute.display rmon history Syntaxdisplay rmon history [port-num ]ViewAll viewsParameterport-num: Ethernet port name.DescriptionUse the display rmon history command to view the latest RMON historysampling information (including utility, error number and total packet number).For the related commands, see rmon history.ExampleShow the RMON history information.display rmon history gigabitethernet 2/0/1History control entry 1 owned by 3Com is VALID,Samples interface : GigabitEthernet1/0/1Sampling interval : 10(sec) with 10 buckets maxLatest sampled values :Dropevents :0 , octets :0packets :0 , broadcast packets :0multicast packets :0 , CRC alignment errors :0undersize packets :0 , oversize packets :0fragments :0 , jabbers :0collisions :0 , utilization :0Table 64 Output description of the display rmon eventlog commandField DescriptionEvent table 1 Index 1 in event table3Com OwnerVALID The entry corresponding to the index is validDescription Event descriptionless than (or =) 100 with alarmvalue 0The alarm sample value is less than or equal to 100Alarm sample type is absolute The type of alarm sampling is absoluteGenerates eventLog 1.2 at 0days00h:02m:27sThe eventlog corresponding to the index 1.2 isgenerated at 0days 00h:02m:27s.
