Percent (%) Command Set B-11If the call is under MNP5 data compression, destructive breaks cause bothmodems to reset their data compression tables. When transmissionresumes, the modems build new tables, and the result is lower-than-normal throughput.Percent (%)Command Set&Y0 Destructive, don't send break.&Y1 Destructive, expedited.&Y2 Nondestructive, expedited.&Y3 Nondestructive, unexpedited; the modem sends abreak-in-sequence with data received from yourcomputer or terminal.Command Function&Zn=s Store up to 10 numbers in NVRAM, where n is the position 0-9 inNVRAM, and s is the phone number string. The number string maybe up to 36 characters long, including any Dial command options.Example: AT&Z2=555-6789In the following example, &M0 (no error control) is inserted beforethe Dial command: AT&M0 DS2This command functions differently when Dial Security is enabled.Also, do not include modem settings in the &Zn string. If the callrequires a special setting, insert it in the command string before the DSncommand.&Zn=L Stores the last-dialed number in position n.&Zn? Display the phone number stored in NVRAM at position n (where n= 0-9).&ZC=s Store command string s in NVRAM. The command string can be upto 30 characters long; spaced do not count. This command is usedso you can call another modem without loading yourcommunications software.&ZC? Display the stored command string.Command FunctionCommand Function%$ Display the help panels for the percent (%) command set.
