48 CHAPTER 5: U PGRADING THE F IRMWARE4 Read the license agreement, and then click Yes toagree. The Choose Destination Location screenappears.5 To install the 3Com TFTP Server to the default folder,click Next.To specify another location, click Browse, and thenselect a new location. Click OK, and then click Next.Setup installs the 3Com TFTP Server on the computer.When installation is complete, the Setup Completepage appears.6 Click Finish to exit the setup wizard.Setting Up the 3Com TFTP ServerBefore you can upgrade the firmware, you first needto set up the upload/download directory on the3Com TFTP Server. The Switch will fetch the firmwareupgrade files from this directory.To set up the upload/download directory:1 Start the 3Com TFTP Server by clicking the shortcuton the program folder.The 3Com TFTP Server interface appears.2 On the Options menu, click Options.The Options screen appears.3 In Upload/download directory, type the full path tothe directory where you intend to copy the firmwareupdates. For example, you can type C:\TFTP\ (as inthe example in Figure 26).Alternatively, click Browse Directories, and then selecta folder from the directory tree.Figure 26 Options Screen4 Click OK.Downloading Firmware UpdatesYou can periodically check the 3Com Web site(www.3Com.com) for firmware updates to theSwitch.To check for and download available firmwareupdates:1 Start your Web browser, and then enterwww.3com.com in the Address or Location bar.2 Click Support & Downloads, and then click Down-loads & Drivers. The Search for Downloads pageappears.3 In Enter a Product Number, enter 3C16490, and thenclick Quick Search. 3C16490 is the product numberfor 3Com Baseline Switch 2226-PWR Plus.The Download Search Results page displays any avail-able download for the Switch.