Restricting Workstations from Accessing Service Provider(s) 69RestrictingWorkstations fromAccessing ServiceProvider(s)If you want to restrict a workstation(s) on the LAN from accessing a serviceproviders(s), do the following.1 click Workstation Parameters from the ISDN LAN Modem home page.2 Select the workstation from which you want to limit access.3 Clear the check boxes located next to the names of the service provider(s) youwant to restrict from accessing that service provider over the LAN.4 When finished, click Submit.5 Repeat the previous steps for additional workstation access restrictions.If you want to password protect the configuration profile of the ISDN LANModem, refer to “Locking and Unlocking the Configuration.”Configuring Your LANParametersThis section describes how to configure the parameters of your LAN. (LAN refersto that section of the network comprising your ISDN LAN Modem and all thecomputers or other devices attached to it by means of Ethernet cabling.) Thissection describes the LAN parameters and then provides configuration steps.Understanding LANParametersThe LAN Parameters window, shown in Figure 47, contains the following fields.Figure 47 LAN Parameters WindowNameDisplays the name for the ISDN LAN Modem. This name is used for DNS. Forexample, the name LANmodem is translated to its IP address 192.168.1.1.
