74 CHAPTER 6: ADVANCED CONFIGURATIONChanging Call Routing This section describes the default setting for routing voice and data calls andprovides instructions for changing the way voice and data calls are routed.Default Setting By default, incoming voice calls to telephone number 1 are routed to phone port1, incoming voice calls to telephone number 2 are routed to phone port 2. Also,data calls are allowed over all three ISDN telephone numbers.A checked box indicates both incoming and outgoing calls (voice or datadepending on the box(es) checked) may be received and dialed over that ISDNtelephone number.Changing Call Routing To change the call routing setting, do the following.1 From the ISDN LAN modem’s home page, select the telephone graphic.The Call Routing window appears.Figure 49 Call Routing Window2 Specify which Phone port, if any, should handle calls associated with TelephoneNumber 1 by checking the appropriate phone port box.If you would also like to use this telephone number for data calls, check the databox.3 If your ISDN line has a second telephone number, specify which phone port, if any,should handle calls associated with Telephone Number 2.If you would also like to use this telephone number for data calls, check the databox.4 If your ISDN line has a third telephone number, specify which phone port, if any,should handle calls associated with Telephone Number 3.
