6-143. Set XMODEM protocol parameter4. Update through file in device0. Return to boot menuEnter your choice(0-4):Enter 0 to return to the Boot Menu.BOOT MENU1: Download application file to device2: Select application file to boot3: Display all files in device4: Delete file from device5: Modify bootrom password0: RebootEnter your choice(0-5):Enter 0 to reboot the switch. The Boot ROM upgrade is completed.Upgrading Through Command LinesIf your terminal is connected to the switch over a network, you can upgrade the Boot ROM program andhost software through command lines.Upgrading Using FTPRun the FTP Server on the local PC (assume its IP address is 10.10.110.1). Ensure that you haveconfigured the username and password and set the correct file directory. Log into the switch throughTelnet or the console port, and then download the host software package to the switch using FTP.Assume that:z The main boot file is SWITCH002.app.z The active host software is SWITCH001.app.Follow these steps after logging into the switch.1) Download the software to the switch using FTP.<3Com> ftp 10.10.110.1Trying ...Press CTRL+K to abortConnected to 10.10.110.1220 WFTPD 2.0 service (by Texas Imperial Software) ready for new userUser(none):liujidong331 Give me your password, pleasePassword:230 Logged in successfully[ftp] binary[ftp] get SWITCH002.app[ftp] bye
